With the widespread application of splicing screens and the vigorous development of the industry, more and more people have come into contact with the splicing screen industry, engaged in related work, procurement and post-maintenance, etc., and the knowledge about LCD splicing screens is particularly important. It is the maintenance of the splicing screen in the later operation process.

Today, Hongshi will take you to understand the solution and specific cause analysis when the splicing screen has ripples. 

 

Moires, stripes, etc., we often see in our lives, such as the ripples of TVs and computers. This is a common phenomenon on display screens, and the same is true for splicing screens. The specific reasons are as follows:

Loose connection between the graphics card and the LCD splicing screen, damage to the graphics card, excessive overclocking of the graphics card, etc., will cause abnormalities such as ripples on the screen; at this time, the graphics card should be replaced

Suppose the splicing screen device you are using does not support the current output content, or if the initial settings are incorrect, ripples will occur. At this time, you need to reset the resolution or check whether the resolution of the splicing screen device is in line with the current output object, such as If it does not meet the requirements, you can give feedback to the manufacturer, so the editor suggests that you must choose carefully when you start to choose a splicing screen manufacturer. 

At the initial stage of installation, professional engineers will thoroughly check the installation environment of the splicing screen to prevent static electricity, but sometimes when encountering unprofessional technicians or omissions during the installation process, the splicing screen will generate static electricity with the human body, resulting in ripples. Good grounding and insulation devices in the early stage are particularly important; there is also the mutual interference of electromagnetic waves, the repulsion between strong cables and weak cables, which will interfere with the display screen and cause ripples. Therefore, experts suggest that before installation, it is assumed that splicing There are strong cables and weak cables in the screen system, which must be separated by wire slots.

The above are some of the reasons and related solutions for the ripples in the splicing screen summarized by the editor. If there are any deficiencies, please feel free to add them. I hope it will be helpful to Xiaobai who is new to the splicing screen industry.